Metallect steel Industries

Check Buttweld A860 Gr WPHY 70 Elbow Grade Equivalent, Manufacturers Of Carbon Steel WPHY 70 Material In India.


WPHY, or as also known as Wrought high Yield strength fittings as its the name suggests have a high yield strength. Therefore, the ASTM A860 WPHY 70 Fittings are primarily used in industries such as Power Plants, Chemical Plants, Oil Refineries, Shipbuilders as well as Offshore Platforms, and Petrochemical industries. Low alloyed CS ASTM A860 WPHY 70 Buttweld Fittings produced under this specification are either constructed in a seamless or in an electric fusion welded manner. Although the cost and construction methods of both seamless &welded fittings vary, with a proper finishing performed on the ASTM A860 Gr WPHY 70 High Yield U Bend, the appearance of a welded seam could be minimized extensively, such that it is barely visible to naked eyes. Usually, a seamlessly constructed SA860 WPHY 70 Lateral Tee is preferred on account of its smooth finish.


ASTM A860 WPHY 70 Fittings

ASTM A860 WPHY 70 Fittings

Buttweld A860 Gr WPHY 70 Elbow

Buttweld A860 Gr WPHY 70 Elbow

Carbon Steel WPHY 70 Material

Carbon Steel WPHY 70 Material



Get instant delivery Of Carbon ASTM A860 WPHY 70 Buttweld Fittings In India, Specification Of Carbon Steel A860 WPHY 70 Lateral Tee, Cut to size ASTM A860 Gr WPHY 70 High Yield U Bend.


What Is ASTM A860 WPHY 70 Fittings?


Apart from the chemical and mechanical property requirements for these fittings, the Carbon Steel WPHY 70 Material is to be heat treated by conducting operations like normalizing, quenching, and tempering or stress relieving. Moreover, the Buttweld A860 Gr WPHY 70 Elbow is required to conform to values such as elongation, yield strength, tensile strength, notch toughness, and hardness.


CS A860 Gr WPHY 70 Elbow Specification


Standard Specification : ASTM A860 WPHY 70 Fittings
Fitting Machining Equipment: Sand-blasting machine, Press machine, Bending machine, Electric bevelling machine, Pushing Machine etc
Dimensions Class: 2000#, 3000#, 6000#, 9000#
Rating Pressure: Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS
Check Sizes: (SMLS UPTO 24”)
1/2” TO 36”
(Buttweld 8” TO 36” )
Standard: MSS-SP-43 Type b Fittings, MSS-SP-43 Type A Fittings, ANSI B16.28 Fittings, JIS B2313 Fittings, ANSI B16.9 Fittings, JIS B2312 Fittings, MSS-SP-43 Type B Fittings
Thickness: View Our Thickness: Sch5S, Sch10, Sch20, Sch10, Sch20, Sch30, SchTD, Sch40, Sch60, XS, Sch80, Sch100, Sch120, Sch140, Sch160.
Application: Nuclear Power Plant
Natural Gas Industry
Oil And Gas Industry
Fabrication Industry
Water Pipeline Industry
Chemical Industry
Coating Fitting Faces : Anti-rust Paint, Zinc Plated, Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent

Refar A860 Gr WPHY 70 High Yield Pipe Nipple Weight Chart, High Yield A860 MSS SP 75 WPHY 70 Tee Supplier In India, Get Discount On Carbon Steel ASTM A 860 WPHY 70 Stub End.


ASTM A860 WPHY 70 Buttweld Fittings Type


Carbon Steel A860 WPHY 70 Weld Lateral Tee

Carbon Steel A860 70 Weld Lateral Tee

High Yield Carbon Steel A860 WPHY 70 End Cap

High Yield Carbon Steel A860 70 End Cap

ASTM A860 Carbon Steel WPHY 70 Reducing Tee

ASTM A860 Carbon Steel WPHY 70 Reducing Tee

ASTM A860 High Yield Gr WPHY 70 Stub Ends

ASTM A860 High Yield Gr WPHY 70 Stub Ends

A860 Carbon Steel WPHY-70 Equal Tee

A860 Carbon Steel-70 Equal Tee

A860 Gr WPHY 70 180 Deg Elbow

A860 Gr 70 180 Deg Elbow

WPHY 70 BW Cross Fitting

WPHY 70 BW Cross Fitting

MSS SP 75 WPHY 70 Material

MSS SP 75 WPHY 70 Material

Buttweld WPHY-70 Concentric Reducer

Buttweld WPHY-70 Concentric Reducer

MSS SP 75 WPHY 70 Eccentric Reducer

MSS SP 75 70 Eccentric Reducer

ASTM A860 Gr WPHY 70 45 Degree Elbow

ASTM A860 Gr WPHY 70 45 Degree Elbow

Carbon Steel MSS SP75 WPHY 70 90 Deg Elbow

Carbon Steel MSS SP75 70 90 Deg Elbow


WPHY 70 Material Chemical Composition


C Mn P S Si Ni Cr Mo Cu Ti V Cb Al
A860 WPHY 70 0.20 1.00-1.45 0.03 0.01 0.15-0.40 0.50 0.30 0.25 0.35 0.05 0.10 0.04 0.06

ASTM A860 Grade WPHY 70 Seamless Pipe Fitting Stockist In India, View A860 Grade WPHY 70 Cross Mechanical Properties And Carbon Steel Grade 70 Reducer Chemical Composition.

ASTM A860 Gr WPHY 70 Mechanical Propertie


Tensile Strength (mpa) Yield Strength (mpa)
A860 WPHY 70 485 570

A860 Gr WPHY 70 High Yield Lateral Tee Pressure Rating


A860 Gr WPHY 70 High Yield Lateral Tee Pressure Rating


We provide Carbon Steel ASTM A860 WPHY 70 Fittings In-House Cutting, Also Check MSS SP 75 WPHY 70 Carbon Steel Swage Nipple Pressure Rating, Buy directly from MSS SP-75 Gr 70 End Pipe Cap Manufacturers in Mumbai, India.

Elbow WPHY 70

Elbow WPHY 70

ASTM A860 API 5L X70 elbow manufacturer

  • ASTM A860 WPHY 70 elbow size : Seamless:1/2"-30"
  • Buttweld-WPHY 70 Fittings standard : ASME B16.9, MSS SP-75
  • MSS SP 75 WPHY 70 elbow thick. : Sch 10S, SCH 20, SCH 30, SCH 40
  • ASTM A860 Gr WPHY 70 elbow deg : 22.5 degree, 30 degree,45 degree, 90 degree, 180 degree, 1.0D, 1.5D

ASTM A860 WPHY Reducer

ASTM A860 WPHY 70 Reducer

3.ASTM A860 MSS SP 75 70 Reducer

WT: sch40/ std/ sch80/ thick-wall

Carbon Steel Grade WPHY 70 Pipe Concentric

A860 WPHY 70 Eccentric Reducer

MSS SP 75 A860 WPHY 70 Con/ Ecc Reducer


ASTM A860 WPHY Cap

A860 Gr WPHY 70 CAP

4. Buttweld-WPHY 70 SMLS CAP

MSS SP 75 WPHY 70 cap

Cap Pipe fittings

  • Carbon Steel MSS SP75 70 Cap Wall thickness : Sch5~Sch160\ XXS
  • CS A860 WPHY 70 Weld Cap Fittings Material : A600 Gr WPL6/ WPL3
  • High Yield Carbon Steel A860 WPHY 70 End Pipe Cap Standard : ANSI, ASTM, ASME, JIS, BS, MSS, DIN etc.
  • ASTM A860 Carbon Steel WPHY 70 Cap Size : 1/2’’~48’’(SMLS);16’’~72’’(Welded)

ASTM A860 WPHY Cap Stubend

ASTM A860 High Yield Gr 70 Stubend

5. A860 Carbon Steel-WPHY 70 Stubend

ASTM A860 60 Stubend
these Material ASTM A860 Buttweld are known for accurate dimension, corrosion resistance and durability.
A860 Gr WPHY 70 Short Stubend
ASTM A860 WPHY 70 BW Long Stubend


Carbon Steel ASTM A 860 WPHY 70 Stub End Weight Chart


Carbon Steel ASTM A 860 WPHY 70 Stub End Weight Chart