Metallect steel Industries

Manufacturers Of Carbon Steel WPHY 56 Elbow In India, Check Buttweld A860 Gr WPHY 56 Material Grade Equivalent.


Hence, using ASTM A860 WPHY 56 Fittings would ensure longevity and good performance. WPHY fittings are referred to as Wrought plate or pipe high yield fittings. These high yield fittings are made in specific grades. The grade would indicate its minimum yield strength in PSI. Therefore the minimum yield strength of Buttweld A860 Gr WPHY 56 Material is valued at 56000 PSI.


The material used in the production of these Carbon Steel WPHY 56 Elbow fittings i.e. low alloy steels like carbon steel is required to be heat treated by quenching, normalizing, and tempering or stress relieving. The construction method of SA860 WPHY 56 Cross could be either seamless or by welding.


ASTM A860 WPHY 56 Fittings

ASTM A860 WPHY 56 Fittings

ASME B16.11 Carbon Steel WPHY 56 Elbow

ASME B16.11 Carbon Steel WPHY 56 Elbow

Buttweld A860 Gr WPHY 56 Material

Buttweld A860 Gr WPHY 56 Material



Specification Of Carbon Steel WPHY 56 Long Radius Bend, Get instant delivery Of A860 WPHY 56 Cross In India, Cut to size ASTM A860 WPHY 56 Buttweld Fittings.


What Is ASTM A860 WPHY 56 Fittings?


The radius of curvature in a Carbon Steel WPHY 56 Long Radius Bend is about 1.5 times its nominal diameter. In a traditional elbow fitting the radius of curvature is usually one time the nominal diameter of the pipe. In comparison to a short elbow, a long radius elbow provides less frictional resistance to the fluid. It is required that the ASTM A860 WPHY 56 Buttweld Fittings conform to the mechanical properties like yield strength, tensile strength as well as elongation, notch toughness, and hardness.


Specification Of Buttweld A860 Gr WPHY 56 Material


Standard Specification : ASTM A860 WPHY 56 Fittings
Thickness: View Our Thickness: Sch5S, Sch10, Sch20, Sch10, Sch20, Sch30, SchTD, Sch40, Sch60, XS, Sch80, Sch100, Sch120, Sch140, Sch160.
Coating Fitting Faces : Cold and Hot Dip Galvanized, Anti-rust Paint, Zinc Plated, Oil Black Paint, Yellow Transparent
Fitting Machining Equipment: Electric bevelling machine, Sand-blasting machine, Press machine, Bending machine, Pushing Machine etc
Dimensions Class: 2000#, 3000#, 6000#, 9000#
Rating Pressure: Pressure Rating Of: 3000 LBS, 6000 LBS, 9000 LBS
Check Sizes: (SMLS UPTO 24”)
1/2” TO 36”
(Buttweld 8” TO 36” )
Standard: JIS B2313 Fittings, ANSI B16.9 Fittings, MSS-SP-43 Type b Fittings, MSS-SP-43 Type A Fittings, JIS B2312 Fittings, ANSI B16.28 Fittings, MSS-SP-43 Type B Fittings
Application: Water Pipeline Industry
Oil And Gas Industry
Natural Gas Industry
Fabrication Industry
Nuclear Power Plant
Chemical Industry

A860 Gr WPHY 56 End Pipe Cap Supplier In India, Refar ASTM A860 Grade WPHY 56 Pipe Nipple Weight Chart, Get Discount On ASTM A860 Gr WPHY 56 Stub End.


Types Of ASTM A860 WPHY 56 Buttweld Fittings


A860 Carbon Steel WPHY-56 Equal Tee

A860 Carbon Steel WPHY-56 Equal Tee

A860 Gr WPHY 56 180 Deg Elbow

A860 Gr WPHY 56 180 Deg Elbow

WPHY 56 BW Cross Fitting

WPHY 56 BW Cross Fitting

MSS SP 75 WPHY 56 Material

MSS SP 75 56 Material

Carbon Steel A860 WPHY 56 Weld Lateral Tee

Carbon Steel A860 56 Weld Lateral Tee

High Yield Carbon Steel A860 WPHY 56 End Cap

High Yield Carbon Steel A860 WPHY 56 End Cap

ASTM A860 Carbon Steel WPHY 56 Reducing Tee

ASTM A860 Carbon Steel 56 Reducing Tee

ASTM A860 High Yield Gr WPHY 56 Stub Ends

ASTM A860 High Yield Gr 56 Stub Ends

Buttweld WPHY-56 Concentric Reducer

Buttweld WPHY-56 Concentric Reducer

MSS SP 75 WPHY 56 Eccentric Reducer

MSS SP 75 WPHY 56 Eccentric Reducer

ASTM A860 Gr WPHY 56 45 Degree Elbow

ASTM A860 Gr 56 45 Degree Elbow

Carbon Steel MSS SP75 WPHY 56 90 Deg Elbow

Carbon Steel MSS SP75 56 90 Deg Elbow


Carbon A860 Grade WPHY 56 Weight Chart


Carbon A860 Grade WPHY 56 Weight Chart

View ASTM A860 MSS SP 75 WPHY 56 Pipe Fittings Mechanical Properties And Carbon Steel Grade 56 Elbow Chemical Composition, A860 Grade WPHY 56 Equal Cross Stockist In India.

Carbon Steel WPHY 56 Elbow Chemical Composition


C Mn P S Si Ni Cr Mo Cu Ti V Cb Al
ASTM A860 WPHY 56 0.20 1.00-1.45 0.03 0.01 0.15-0.40 0.50 0.30 0.25 0.35 0.05 0.10 0.04 0.06

A860 Gr WPHY 56 End Cap Mechanical Properties


Tensile Strength (mpa)
Yield Strength (mpa)
A860 Gr WPHY 56
390
490

Also Check CS MSS SP75 WPHY 56 Buttweld Elbow Pressure Rating, We provide Carbon A860 MSS SP 75 56 Reducer In-House Cutting, Buy directly from ASTM A860 WPHY 56 Fittings Manufacturers in Mumbai, India.

A860 MSS SP 75 WPHY 56 Pipe Fittings Pressure


A860 MSS SP 75 WPHY 56 Pipe Fittings Pressure


ASTM A860 WPHY Cap Stubend

ASTM A860 High Yield Gr WPHY 56 Stubend

5. A860 Carbon Steel-WPHY 56 Stubend

A860 Carbon Steel WPHY 56 Stubend
these Material ASTM AWPHY 560 WPL6 Buttweld are known for accurate dimension, corrosion resistance and durability.
A860 Gr WPHY 56 Short Stubend
A860 CS WPHY 56 BW Long Stubend


Elbow WPHY 56

Elbow WPHY 56

ASTM A860 API 5L X56 elbow manufacturer

  • ASTM A860 WPHY 56 elbow size : Seamless:1/2"-30"
  • Buttweld-WPHY 56 Fittings standard : ASME B16.9, MSS SP-75
  • MSS SP 75 WPHY 56 elbow thick. : Sch 10S, SCH 20, SCH 30, SCH 40
  • ASTM A860 Gr WPHY 56 elbow deg : 22.5 degree, 30 degree,45 degree, 90 degree, 180 degree, 1.0D, 1.5D
ASTM A860 WPHY Tee

ASTM A234 WPHY 56 Tee

2. Carbon Steel MSS SP75 56 Tee

Carbon Steel A860 WPHY 56 Weld Reducing Tee

High Yield Carbon Steel A860 WPHY 56 Tee

  • ASTM A860 Carbon Steel WPHY 56 Tee Material : A234-WP11. A234-WP5, A234-WPB.A860-WPL6.A234-WP12.
  • ASTM A860 High Yield Gr WPHY 56 Packaging : wooden pallet or Wooden Cases as per Client Requirement
  • A860 Carbon Steel-WPHY 56 Tee Applications Range : Gas, power, shipbuilding, construction, metallurgy, Petroleum, chemical etc
  • ASTM A860 WPHY 56 Tee Size : 1/2"-72"DN15-DN1800
  • A860 Gr WPHY 56 Tee Dimension Tolerance : ±12.5%
  • ASTM A860 WPHY 56 BW Standard: ISO. ANSI. JIS. DIN GB/T13401/T12459GB ASME B16.9

ASTM A860 WPHY Reducer

ASTM A860 WPHY 56 Reducer

3.ASTM A860 MSS SP 75 56 Reducer

WT: sch40/ std/ sch80/ thick-wall

Carbon Steel Grade WPHY 56 Pipe Concentric

A860 WPHY 56 Eccentric Reducer

MSS SP 75 A860 WPHY 56 Con/ Ecc Reducer


ASTM A860 WPHY Cap

A860 Gr WPHY 56 CAP

4. Buttweld-WPHY 56 SMLS CAP

MSS SP 75 WPHY 56 cap

Cap Pipe fittings

  • Carbon Steel MSS SP75 WPHY 56 Cap Wall thickness : Sch5~Sch160\ XXS
  • CS A860 WPHY 56 Weld Cap Fittings Material : AWPHY 560 Gr WPL6/ WPL3
  • High Yield Carbon Steel A860 WPHY 56 End Pipe Cap Standard : ANSI, ASTM, ASME, JIS, BS, MSS, DIN etc.
  • ASTM A860 Carbon Steel WPHY 56 Cap Size : 1/2’’~48’’(SMLS);16’’~72’’(Welded)