Metallect steel Industries

Refer A694 F60 Forged Fitting Chemical Composition, A694 Grade F60 Loose Flanges Casting Equivalent.


Generally, the specified ASTM A694 F60 Flanges are to be subjected to a chemical heat analysis. On the other hand, fittings produced under standard ANSI B16.11 and ASME B16.5 are required to be produced in accordance with the following parameters pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings. These parameters are intended to be used in the manufacture of forged products such as the ANSI B16.11 A694 Gr F60 Elbow. Using a forging process on these components results in a directional grain flow. Which is why the mechanical and metallurgical properties of an ASTM A694 F60 Forged Fitting tend to be much better in comparison to any other process. The structural integrity of a forged fitting or a flange cannot be beaten by any other transformation process.


ASTM A694 F60 Flanges

ASTM A694 F60 Flanges

A694 F60 Forged Fitting

A694 F60 Forged Fitting

SA694 Gr F60 WNRF Flanges

SA694 Gr F60 WNRF Flanges



Carbon Steel F60 Chemical Composition


Chemical Composition
Carbon [C] ≤0.30
Manganese [Mn] ≤1.60
Phosphorus [P] ≤0.025
Sulfur [S] ≤0.025
Silicon [Si] 0.15-0.35

A694 Gr F60 Elbow Mechanical Properties, Check A694 Gr F60 WNRF Flanges UNS Number, ASTM A694 F60 Specification.


What Is ASTM A694 F60 Flanges?


Since forging these components removes any form of porosities, gases and internal cavities there would be a reduction in the unexpected faults of ASME B16.5 A694 Gr F60 WNRF Flanges under stress, fatigue and impact. Lap joint flanges or as also referred to as loose flanges have a corresponding stub-end that that could be inserted in the inside of the flange. The main benefit of the Carbon Steel A694 Grade F60 Loose Flanges is that once the pipe has been welded to the insert stub-end, the flange is then able to rotate to create an easier alignment of the bolting holes. Blind flanges are used to seal off a valve in a piping system, thus the Carbon Steel A694 Grade F60 BLRF Flanges prove to be a leaf-poof solution for piping systems.


A694 F60 Forged Fitting Specification


Specification : ASTM A694 F60 Flanges
Design For Size: BS, PN, EN, ASA, ASME, DIN, JIS, ANSI
Flange Machining Equipment: electric bevelling machine, Bending machine, Pushing Machine, Press machine, Sand-blasting machine etc
Size Chart : 1/2″ (15 NB) To 48″ (1200NB)
Coating Flange Faces : Cold and Hot Dip Galvanized, Zinc Plated, Yellow Transparent, Oil Black Paint, Anti-rust Paint
Dimensions Class: 2000#, 3000#, 6000#, 9000#
Forged Type : NPT (Threaded), BSPT, BSPP.
Pressure Rating Table: Class 150 LBS, Class 300 LBS, Class 600 LBS, Class 900 LBS, Class 1500 LBS, Class 2500 LBS
Standards: ASME B16.38 Flanges, EN-1092 Flanges, BS10 Flanges, DIN Flanges, PN Flanges, JIS Flanges, ISO Flanges, UNI Flanges, AWWA Flanges, MSS SP44 Flanges, ASME B16.5 Flanges, ASME B16.47 (Series A, Series B), GOST Flanges
Production Process: Machined, Forged, Heat Treated
Application: Natural Gas Industry
Fabrication Industry
Chemical Industry
Nuclear Power Plant
Water Pipeline Industry
Oil And Gas Industry

A694 CS Gr F60 Mechanical Properties


Element Tensile Strength Yield Strength (0.2%Offset) Elongation
Carbon Steel F60 515 415 20 %

ASTM A694 F60 Forged Pipe Fittings Manufacturers In India, Carbon Steel A694 Grade F60 BLRF Flanges Tensile Requirements, ASTM A694 F60 Weld Neck Flanges Temperature Range.


A694 F60 High Pressure Forged Fittings Types


A694 CS Gr F60 Socket Weld Flange

A694 CS Gr F60 Socket Weld Flanges

Grade F60 Carbon Steel Slip On Flange

Grade F60 Carbon Steel Slip On Flanges

High Yield Carbon Steel F60 RTJ Flange

High Yield Carbon Steel F60 RTJ Flanges

Steel Grade F60 Raised Face Flange

Steel Grade F60 Raised Face Flanges

SA 694 F60 Blind Flange

SA 694 F60 Blind Flanges

Carbon Steel A694 Grade F60 Flat Face Flange

Carbon Steel A694 Grade F60 Flat Face Flanges

ASTM A694 Gr F60 Reducing Flange

ASTM A694 Gr F60 Reducing Flanges

A694 F60 Weld Neck Flange

A694 F60 Weld Neck Flanges

Carbon Steel A694 F60  90 Deg Elbow

Carbon Steel A694 F60 90 Deg Elbow

Carbon Steel ASME SA694 F60 Socket Weld Tee

Carbon Steel ASME SA694 F60 Socket Weld Tee

ASME SA 694 F60 Threaded Union

ASME SA 694 F60 Threaded Union

ASTM A694 F60 Steel Threaded Hex Plug

ASTM A694 F60 Steel Threaded Hex Plug


ASTM A694 Gr F60 Forged Fittings Thermal Properties, A694 F60 Flanges Magnetic Properties, A694 Carbon Steel Gr F60 Sockolet Suppliers In India.

SA 694 F60 Magnetic Properties


Curie temperature 770 °C at 20 °C Typical for Low Carbon Steel

Flange ASTM A694 F60 Thermal Properties


Coefficient of thermal expansion 1.32E-5 - 1.38E-5 1/K at 20 °C Typical for Low CS
Max service temperature 500 °C Typical for CS
Melting point 1480 - 1526 °C Typical for Low CS

ASME SA 694 F60 Temperature Range


Temp. °C ASTM A694 F60 Flanges Working Pressure Range
150 300 400 600 900 1500 2500
-29 ~ 38 19.6 51.1 68.1 102.1 153.2 255.3 425.5
50 19.2 50.1 66.8 100.2 150.4 250.6 417.7
100 17.7 46.6 62.1 93.2 139.8 233.0 388.3
150 15.8 45.1 60.1 90.2 135.2 225.4 375.6
200 13.8 43.8 58.4 87.6 131.4 219.0 365.0
250 12.1 41.9 55.9 83.9 125.8 209.7 349.5
300 10.2 39.8 53.1 79.6 119.5 199.1 331.8
325 9.3 38.7 51.6 77.4 116.1 193.6 322.6
350 8.4 37.6 50.1 75.1 112.7 187.8 313.0
375 7.4 36.4 48.5 72.7 109.1 181.8 303.1
400 6.5 34.7 46.3 69.4 104.2 173.6 289.3
425 5.5 28.8 38.4 57.5 86.3 143.8 239.7
450 4.6 23.0 30.7 46.0 69.0 115.0 191.7
475 3.7 17.4 23.2 34.9 52.3 87.2 145.3
500 2.8 11.8 15.7 23.5 35.3 58.8 97.9
538 1.4 5.9 7.9 11.8 17.7 29.5 49.2

Dimensions Of A694 F60 High Pressure Forged Fittings In Millimetar, A694 Grade F60 Forged Screwed Fittings Weight Chart, Buy ASTM A694 F60 Flanges small quantity at Factory Price.

A694 Grade F60 Dimensions


NPS
Flanges (ID)
(inch)
Flanges (OD)
(inch)
150# 300# 400# 600# 900#
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

ASTM A694 Gr F60 Weight Chart


Standard Class Di. Bolt Circle Dia. No. of Bolts Bolt Size Dia. of Bolt Hole
AS4087 PN14 95 67 4 M12 14
2129 Flange Table C 95 67 4 13 14
Table D 95 67 4 13 14
Table E 95 67 4 13 14
Table F 95 67 4 13 14
Table H 114 83 4 16 17
Table J 114 83 4 16 17
ASME B16.5 Flanges ANSI 150 89 60 4 13 16
ANSI 300 95 67 4 13 16
ANSI 600 95 67 4 13 16
ANSI 900 121 83 4 19 22
ANSI 1500 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 80 55 4 M10 11
PN10 95 65 4 M12 14
PN16 95 65 4 M12 14
PN20 90 60.5 4 M14 16
PN25 95 65 4 M12 14
PN40 95 65 4 M12 14